1 PowerPoint 2010 Applying Transitions Introduction Page 1 Transitions are motion effects that, when in Slide Show View, add movement to your slides a...
1 flowering Why are there so few evolutionary transitions between aquatic and terrestrial ecosystems? GEERAT J. VERMEIJ" Department of GeoloD and...
1 J. Phys. B: At. Mol. Opt. Phys. 26 (1993) L97-L102. Printed in the UK LETTER TO TUE EDITOR Three-electron radiative transitions A Ehresmannt, V A Ki...
1 TRANSITIONS Winter EdITION. Volume 10. Issue From the Director With my hope that all in the SBIR/STTR community enjoyed a well-deserved 2012 holiday...
1 Good Transitions: Lessons from the Transitions West Midlands Project Subscriber Research Series Amanda French, Michelle Kempson and Alex Kendall Bir...
1 LITERATURE REVIEW 2.1 INTRODUCTION The emergence of nanotechnology has provided a vast research area in recent years by intersecting with various ot...
1 This summer the Freshman Team of Hampton High School has decided to give their rising starts a unique challenge. You have three different novels to ...
1 Minnesota Senior Health Options (MSHO) Care Coordination (CC) and Minnesota Senior Care Plus (MSC+) Community Case Management (CM) Requirements Upda...
1 Chapter 6 Comparison of Direct Search Strategies for Parameter Optimization 6. Diculties The vast and steadily increasing number of optimization met...
1 1498 IEEE TRANSACTIONS ON IMAGE PROCESSING, VOL. 28, NO. 3, MARCH 2019 DeepCrack: Learnng Herarchcal Convolutonal Features for Crack Detecton Qn Zou...
PowerPoint 2013 Applying Transitions
Introduction If you've ever seen a PowerPoint presentation that had special effects between each slide, you've seen slide transitions. A transition can be as simple as fading to the next slide or as flashy as an eye-catching effect. PowerPoint makes it easy to apply transitions to some or all of your slides, giving your presentation a polished, professional look.
Video: Applying Transitions
Optional: Download our practice presentation.
About transitions There are three categories of unique transitions to choose from, all of which can be found on the Transitions tab: Subtle: These are the most basic types of transitions. They use simple animations to move between slides.
Exciting: These use more complex animations to transition between slides. While they're more visually interesting than Subtle transitions, adding too many can make your presentation look less professional. However, when used in moderation they can add an nice touch between important slides.
Dynamic Content: If you're transitioning between two slides that use similar slide layouts, dynamic transitions will move only the placeholders, not the slides themselves. When used correctly, dynamic transitions can help unify your slides and add a further level of polish to your presentation.
To apply a transition: 1. Select the desired slide from the Slide Navigation pane. This is the slide that will appear after the transition.
2. Click the Transitions tab, then locate the Transition to This Slide group. By default, None is applied to each slide. 3. Click the More drop-down arrow to display all transitions.
4. Click a transition to apply it to the selected slide. This will automatically preview the transition.
You can use the Apply To All command in the Timing group to apply the same transition to all slides in your presentation. Keep in mind that this will modify any other transitions you've applied.
Try applying a few different types of transitions to various slides in your presentation. You may find that some transitions work better than others, depending on the content of your slides.
To preview a transition: You can preview the transition for a selected slide at any time using either of these two methods: Click the Preview command on the Transitions tab.
Click the Play Animations command in the Slide Navigation pane.
Modifying transitions To modify the transition effect: You can quickly customize the look of a transition by changing its direction. 1. Select the slide with the transition you want to modify. 2. Click the Effect Options command, and choose the desired option. These options will vary depending on the selected transition.
3. The transition will be modified, and a preview of the transition will appear. Some transitions do not allow you to modify the direction.
To modify the transition duration: 1. Select the slide with the transition you want to modify. 2. In the Duration field in the Timing group, enter the desired time for the transition. In this example, we'll increase the time to two seconds—or 02.00—to make the transition slower.
To add sound: 1. Select the slide with the transition you want to modify. 2. Click the Sound drop-down menu in the Timing group. 3. Click a sound to apply it to the selected slide, then preview the transition to hear the sound.
Sounds are best used in moderation. Applying a sound between every slide could become overwhelming or even annoying to an audience when presenting your slide show.
To remove a transition: 1. Select the slide with the transition you want to remove. 2. Choose None from the Transition to This Slide group. The transition will be removed.
To remove transitions from all slides, apply the None transition to a slide, then click the Apply to All command.
Advancing slides Normally, in Slide Show view you would advance to the next slide by clicking your mouse or by pressing the spacebar or arrow keys on your keyboard. The Advance Slides settings in the Timing group allows the presentation to advance on its own and display each slide for a specific amount of time. This feature is especially useful for unattended presentations, such as those at a trade show booth.
To advance slides automatically: 1. Select the slide you want to modify. 2. Locate the Timing group on the Transitions tab. Under Advance Slide, uncheck the box next to On Mouse Click. 3. In the After field, enter the amount of time you want to display the slide. In this example, we will advance the slide automatically after 1 minute and 15 seconds, or 01:15:00.
4. Select another slide and repeat the process until all the slides have the desired timing. You can also click the Apply to All command to apply the same timing to all slides. If you need to advance to the next slide before an automatic transition, you can always click the mouse or press the spacebar to advance the slides as normal.
Challenge! 1. Open an existing PowerPoint presentation. If you want, you can use our practice presentation. 2. Select a slide, and apply a transition. 3. Change the transition duration. 4. Add a sound effect to the transition. 5. Apply a dynamic slide transition. If you are using the example, apply a dynamic transition to slide 5. 6. Remove the transitions from all slides.